TEL:400-0033-603
銷售熱線：
總經理投訴電話：18009693519
------- 實驗室預約 --------
微信公眾號
主要特點Main features:
1) The item is suitable for powder materials.
該設備適用于粉末材料
2)310S high temp.-resistant S.S. tube put in the middle of furnace, one end sealed by magnetic fluid, the other end uses clamp-joint rotating seal elements, in order to move materials in and out easier, also monitor the pressure inside tube.
310S耐高溫不銹鋼爐管放置于爐體中間，爐管一端采用磁流體密封，爐管另一端采用卡箍連接旋轉密封組件，方便物料出入及管內氣壓監測。
2) When tube rotating, powder materials can be evenly stirred, not piled up, moreover, when powder discharging, completely auto-discharging in one way, no remains at all.
爐管旋轉過程中粉料能均勻攪拌不堆積，出料的過程中也能一個方向完全自動出料，沒有滯留。
3)Widely used to calcine and dry for battery material, non-strong alkali powder material ,granular material
廣泛應用于電池正負極材料，無強酸堿性粉體材料，顆粒狀物料。
4)can supply vacuum or gas protection experiment environment.
可在真空下或氣氛保護下進行燒制
技術參數Technical Parameters：
|
Power 輸入電源 |
Power rated: 28KW (208-240V) 額定功率：28KW (208-240V) |
||||
|
Voltage 電壓 |
Voltage rated: AC208-240V 50/60HZ 額定電壓： AC208-240V 50/60HZ |
||||
|
Working Temperature 工作溫度 |
Max. Temperature: 800℃(310S S.S. tube), 1100℃ (high-purity quartz tube) 最高溫度：800℃(310S不銹鋼管), 1100℃ (高純石英管) Continuous working temperature: 700℃ 持續工作溫度：700℃ Heating Rate: 10℃/min 升溫速率：10℃/分 |
||||
|
控溫方式 |
PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 |
||||
|
Length of heating zone 加熱區長度 |
900mm |
||||
|
Length of constant zone 恒溫區長度 |
500mm |
||||
|
Heating Elements 加熱元件 |
Resistance wire, Fe-Cr-Al Alloy doped by Mo 電阻絲（摻鉬鐵鉻鋁合金） |
||||
|
Temperature Accuracy 控溫精度 |
+/- 1℃ |
||||
|
Dimensions 尺寸 |
Tube size: S.S.310S Shaped tube, 2*Φ50*400 (two ends) +φ270*860 (middle) mm 爐管尺寸：不銹鋼310S異形爐管2*Φ50*400（兩端）+φ270*860（中間）mm Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating). 兩個氧化鋁管堵阻擋管中心產生的熱輻射（氧化鋁管堵必須在加熱前塞進爐膛） |
||||
|
Inclinable angle 可傾斜角度 |
30 degree (adjustable) 30度(可調) |
||||
|
Rotate rate 爐管轉速 |
6-50 round/min (adjustable) 6-50轉/分(可調) |
||||
|
Net Weight 凈重 |
90kg |
||||
|
密封 |
one end sealed by magnetic fluid, 一端采用磁流體密封 The other end uses clamp-joint rotating seal elements 另一端采用卡箍連接旋轉密封
|
||||
|
Vacuum Pressure 真空壓力 |
1pa can be achieved by mechanical pump 機械泵可達1pa 10^-4 pa can be reached by molecular pump 分子泵可達10^-4pa Please click the picture below to order vacuum parts 點擊下列圖片訂購真空部件
|
||||
|
Warranty 質保 |
One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） |
||||
|
Warning 注意事項 |
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 |
||||
|
Compliance 認證 |
CE Certified CE認證 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 可付費進行TUV(UL61010)或CSA認證 |
||||
|
Operation instructions 操作指導 |
Click to download the operating manual 點擊下載說明書 |
